Pianos regularly make movers annual list of items that are most regularly harmed. Grand pianos are especially bothersome. Practicing the following treatments for taking apart, padding and filling grand pianos will prevent damage, lower claims expenditure, and improve consumer complete satisfaction.
1) At least three individuals are needed to handle an infant grand piano. If the baby grand piano requires to go up or down stairs or if a complete or concert grand piano needs to be transferred, a minimum of 4 people are required.
2) Constantly complete a accurate and thorough stock. It might be required or more suitable to utilize a visual inventory to sufficiently explain and reveal pre-existing damage.
3) As various parts are disassembled, please place all hardware in a properly labeled parts bag and then place the parts bag in a "Parts Box".
4) Eliminate the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a clean furnishings pad.
5) Disconnect the lid by eliminating the hinge pins. Have someone wiggle the lid, holding it opposite the hinge, while a second individual works the pin loose. Please beware not to harm the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a little cloth to help prevent damage to the wood if necessary. Wrap the cover in a clean furniture pad.
6) Get rid of the prop that holds the lid open and wrap it in a clean furnishings pad. The prop has a hinge pin and remains in two pieces.
7) Get rid of the pedal assembly and cover it in a clean furnishings pad. The braces at the rear of the assembly rest in slots at each end. When eliminating the screws, please beware not to drop the braces. In addition, please be specifically cautious with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by placing a piece of masking tape with the proper number on each rod. Note: If masking tape is unavailable, please use properly labeled parts bags for this function. When reassembling at destination, please make sure to put the rods in the correct order so that the pedals will work properly.
8) Pad the piano by putting a clean rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from flopping open while you handle the piano. Note: Please ensure that the surface area of the piano is dust-free prior to padding it.
9) Position a piano board and connect the straps so that it is prepared to get the piano. The raised brace on the piano board need to be at the keyboard end of the piano.
10) Get rid of the left front leg by placing one individual beneath the piano at the left end of the keyboard. The other two people need to support the left front corner. The person underneath the piano need to turn the maintaining block so that the long end points away from the leg. The screws, if there are any, ought to then be removed. The "below" person must then get out from under the piano prior to really eliminating the leg. Be sure to have 2 people raising the corner of the piano while the third person gets rid of the leg. Keep in mind: Please make sure to note which legs were removed from which positions considering that some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to raise the whole piano a little while finishing this maneuver to prevent unnecessary pressure on the remaining, attached legs as the piano tips. Be sure that the piano is focused comfortably versus the brace at the end of the piano board.
12) Eliminate the two remaining legs and cover them in tidy furniture pads. These legs are held in location by a "essential and slot" arrangement. To remove the leg, slide it inward toward the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furniture pads however under the straps to provide additional protection to the edges of the piano. To avoid the strap near the narrow end Get More Information of the piano from slipping off, connect the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for protection versus home damage, position the keyboard end of the piano toward the bottom of the stairs. Connect a hump strap to the leading end of the piano board to prevent the piano from slipping.
16) To pack the piano, leave it on the piano board and place it in a tier as the first base item with the keyboard facing the wall of the preceding tier. The finest place to pack the cushioned lid is in between the piano and the preceding tier or in between the wall and the piano.
Although grand pianos represent a considerable obstacle, they can be moved without damage by utilizing sound judgment and practicing the procedures listed above.