Pianos routinely make movers yearly list of products that are most often damaged. Grand pianos are specifically troublesome. Practicing the following procedures for dismantling, padding and packing grand pianos will prevent damage, lower claims expenditure, and improve consumer satisfaction.
1) A minimum of three people are needed to manage an infant grand piano. If the child grand piano needs to increase or down stairs or if a complete or performance grand piano needs to be carried, a minimum of four people are required.
2) Constantly complete a precise and thorough inventory. It might be essential or more suitable to utilize a visual inventory to sufficiently explain and reveal pre-existing damage.
3) As numerous parts are disassembled, please place all hardware in an appropriately identified parts bag and after that position the parts bag in a "Components Box".
4) Eliminate the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the cover by eliminating the hinge pins. Have a single person wiggle the cover, holding it opposite the hinge, while a second person works the pin loose. Please be cautious not to damage the wood with the pliers or with the pin itself. If needed, cover the jaws of the pliers with a small cloth to help prevent damage to the wood. Wrap the lid in a tidy furnishings pad.
6) Eliminate the prop that holds the lid open and wrap it in a tidy furniture pad. The prop has a hinge pin and is in 2 pieces.
7) Eliminate the pedal assembly and wrap it in a clean furnishings pad. The braces at the rear of the assembly rest in slots at each end. When removing the screws, please take care not to drop the braces. In addition, please be particularly mindful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by positioning a piece of masking tape with the suitable number on each rod. Note: If masking tape is not available, please use properly labeled parts bags for this purpose. When reassembling at destination, please make sure to put the rods in the right order so that the pedals will work properly.
8) Pad the piano by placing a clean rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from flopping open while you deal with the piano. Cover the top of the piano with 2 tidy furniture pads, nicely folded around the keyboard. Usage rubber bands to secure the pads. Note: Please ensure that the surface of the piano is dust-free before padding it. Padding a highly polished surface that is dusty might trigger great scratches, especially on a black lacquer finish.
9) Position a piano board and connect the straps so that it is all set to get the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Remove the left front leg by placing one person beneath the piano at the left end of the keyboard. Be sure to have 2 people raising the corner of the piano while the 3rd individual removes the leg. Note: Please be sure to note which legs were eliminated from which positions given that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to raise the whole piano somewhat while finishing this maneuver to avoid undue pressure on the remaining, attached legs as the piano pointers. Raise the piano to an upright position on the board. Note: Please ensure that the soundboard is safe prior to raising. Make sure that the piano is focused comfortably versus the brace at the end of the piano board. Note: Never ever leave the piano ignored. Constantly have at least one individual holding the piano steady at all times.
12) Get rid of the 2 remaining legs and cover them in tidy furnishings pads. These legs are held in place by a "crucial and slot" plan. To eliminate the leg, slide it inward towards the center of the piano up until it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and attaching them. Place folded burlap pads over the furniture pads however under the straps to offer additional defense to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After adequately padding the stairs for security versus home damage, place the keyboard end of the piano towards the bottom of the stairs. Attach a bulge strap to the top end of the piano board to avoid the piano from slipping.
16) To load the piano, leave it on the piano board and place it in a tier as the very first base item with the keyboard dealing with the wall of the preceding my response tier. The finest location to load the cushioned cover is between the piano and the preceding tier or in between the piano and the wall.
Although grand pianos represent a substantial obstacle, they can be moved without damage by utilizing typical sense and practicing the procedures noted above.